Installation:Setup

From WiRNS Wiki
(Difference between revisions)
Jump to: navigation, search
(Edit your Replay Configurations in WiRNS.)
(Configure your ReplayTV lineups)
Line 53: Line 53:
 
*Once the ReplayTV has completed its update, you will be asked to set up your connections.  After selecting the connection type, you will be asked for the service provider.  Select your desired lineup - it will have 'WiRNS' in the name
 
*Once the ReplayTV has completed its update, you will be asked to set up your connections.  After selecting the connection type, you will be asked for the service provider.  Select your desired lineup - it will have 'WiRNS' in the name
 
** If multiple Schedules Direct line ups are available here is where selecting the correct items is important. For example, if using a cable adapter box choose the correct setting "analog" or "digital" to match the correct listings defined in Schedules Direct
 
** If multiple Schedules Direct line ups are available here is where selecting the correct items is important. For example, if using a cable adapter box choose the correct setting "analog" or "digital" to match the correct listings defined in Schedules Direct
** '''NOTE''' If you have previously used a custom IR control code, remember to choose the same code again here (unless the cable box has been changed too). If a PACE DTA-DC50x unit from Comcast is used a custom code is needed, typically the code for this box is 2009 (the year the box was required)
+
** '''NOTE''' If you have previously used a custom IR control code, remember to choose the same code again here (unless the cable box has been changed too). If a PACE DTA-DC50x unit from Comcast is used a custom code is needed, typically the code for this box is '''1982'''.
  
 
*If this or the previous step failed, change your Zip Code once more and continue
 
*If this or the previous step failed, change your Zip Code once more and continue
 
*Complete the Inputs setup
 
*Complete the Inputs setup
 
*When you return to the Setup Summary, select '''Keep all settings'''
 
*When you return to the Setup Summary, select '''Keep all settings'''

Revision as of 21:27, 26 October 2015

Everything you need to setup should be in this wiki.

If not check forums such as http://www.planetreplay.com/phpBB2/viewforum.php?f=32 , e.g. http://planetreplay.com/phpBB2/viewtopic.php?p=78138 and then add the content that was missing to the wiki!

Contents

Open the Guide Data Configuration Screen

Configure Schedules Direct as your Guide Data Source

Setup guidedata.png

Alternate Guide Data Source

It is possible to use XMLTV Guide Data with WiRNS. Please visit this link as a starting point.

Configure your ReplayTV to work with WiRNS

These steps are for the 4000 and 5000 level ReplayTV Models

Edit your Replay Configurations in WiRNS.

From the WiRNS Menu, Select Configuration->Replays


This will display the Edit Replay screen:

PLEASE NOTE: The above screen does not tell your Replay how to handle the channel lineups, it is meant to reflect how your Replay handles them. So, for example, looking at the above screen shot, if Replay decids to offset the Bell listing by 1000 and use the raw channel numbers for Shaw, you would need to reverse those two entries on this screen.

Configure your ReplayTV lineups

Personal tools
Namespaces
Variants
Actions
Navigation
Installation
Configuration
Administration
Tools
Status
Dialup Replays
Service Monitor
Misc
Toolbox