Installation:System Requirements

From WiRNS Wiki
Jump to: navigation, search
<< Prev: Installation | Next: Installation:Preparation >>

The following are the WiRNS system requirements:

Contents

Windows operating system

Any version of Windows will do, starting with Windows 98. It is well tested up to and including Windows 7, please let us know of any problems with Windows 8 or 10.

.NET Framework

Any version of .NET will do, starting with version 2.0. You probably already have .NET installed on your PC and don't even know it. To check, go to the Control Panel and select Uninstall a Program, then check to see if there is a listing for Microsoft .NET. If it's not there, download the latest version from this link.

Dot net.jpg


A Channel Guide source

A Channel Guide Data source became necessary when DNNA filed for bankruptcy. ref

A ReplayTV unit

You will need a networked ReplayTV unit, such as an RTV4xxx, RTV45xx, RTV5xxx and RTV55xx unit. Older models were dial-up only.

A home network

At the very least, you will need a router to connect your ReplayTV unit and the computer that will be running WiRNS to the internet, but it is also a good idea to have a network switch on the network too.

Optional extras

Download WiRNS

You can download "WiRNS 3.0 Final release" from the following link. Don't worry if you get a warning like "WiRNS.3.0.0.0.msi is not commonly downloaded and could be dangerous", this is nothing to worry about, and you should select "keep".
http://wirns.com/download.htm

One key point when installing WiRNS, you will see a "Test Port 80" button, you must use this to test if Port 80 is clear (you don't need to know what Port 80 is, just that it's clear). In most cases it will be clear, but if it isn't, you can add a second IP address to your computer and then use that for WiRNS. The process is not difficult and is explained here.

Personal tools
Namespaces
Variants
Actions
Navigation
Installation
Configuration
Administration
Tools
Status
Dialup Replays
Service Monitor
Misc
Toolbox